Service, brakes

BMW

Item No.: 10159563

Manufacturer No.: 34116792223

340X30

BMW

Item No.: 10158346

Manufacturer No.: 34106797606

370X30

BMW

Item No.: 10008657

Manufacturer No.: 34106797602

In the M135i and M235i vehicles with standard brake system, the BMW lightweight sports brake discs can be installed on the front and rear axle without additional measures. In 335i and 335d as well as 435i and 435d vehicles with standard brakes, the BMW lightweight sports brake discs can be installed on the front axle without additional measures. On vehicles with 17" or 18" BMW M sports brakes (optional equipment ex works), the perforated, ventilated and grooved BMW lightweight sports brake discs can be installed on the front and rear axle without any additional measures. The lightweight sports brake discs are suitable for individualizing the vehicle, as they cannot be configured as optional equipment ex works. It is recommended that new brake pads are also fitted when installing the BMW lightweight sports brake discs. When retrofitting the M Performance sports brake as an accessory, the perforated and grooved BMW lightweight sports brake discs are already part of the respective retrofit kits. -Reduction in the formation of a water film between the brake pad and brake disc thanks to countersinks and grooves -Low weight, resulting in low unsprung masses -Attractive appearance -emphasizes sportiness, especially with alloy wheels with open wheel design

BMW

Item No.: 10008728

Manufacturer No.: 34106797603

In the M135i and M235i vehicles with standard brake system, the BMW lightweight sports brake discs can be installed on the front and rear axle without additional measures. In 335i and 335d as well as 435i and 435d vehicles with standard brakes, the BMW lightweight sports brake discs can be installed on the front axle without additional measures. On vehicles with 17" or 18" BMW M sports brakes (optional equipment ex works), the perforated and grooved BMW lightweight sports brake discs can be installed on the front and rear axle without additional measures. In the case of an accessory retrofit of the M Performance sports brake, the perforated and grooved BMW lightweight sports brake discs are already part of the respective retrofit kits. An entry in the vehicle documents is not required, as the brake system does not change in the registration-relevant data. -Reduction in the formation of a water film between the brake pad and brake disk thanks to countersinks and grooves. -Low weight, resulting in low unsprung masses. -Attractive appearance. -Emphasizes sportiness, especially with alloy wheels with an open wheel design. -The lightweight sports brake discs are suitable for individualizing the vehicle, as they cannot be configured as optional equipment ex works. It is recommended that new brake pads are also fitted when installing the BMW lightweight sports brake discs. The BMW lightweight sports brake disc, like the respective standard brake disc, is only approved in conjunction with at least 17" or 18" aluminum wheels (also in winter)!

BMW

Item No.: 10160646

Manufacturer No.: 34211161806

M8X14

BMW

Item No.: 10159735

Manufacturer No.: 34116878882

BMW

Item No.: 10159680

Manufacturer No.: 34116865460

BMW

Item No.: 10159734

Manufacturer No.: 34116878876

BMW

Item No.: 10164861

Manufacturer No.: 34356792289

BMW

Item No.: 10159668

Manufacturer No.: 34116862801

BMW

Item No.: 10159611

Manufacturer No.: 34116850934

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10160152

Manufacturer No.: 34206797607

345X24

BMW

Item No.: 10160343

Manufacturer No.: 34206898719

345X24

BMW

Item No.: 10160151

Manufacturer No.: 34206797605

345X24

BMW

Item No.: 10160295

Manufacturer No.: 34206894382

345X24

BMW

Item No.: 10008736

Manufacturer No.: 34206797600

The BMW lightweight sports brake discs are perforated, grooved and ventilated. -Improved thermal load capacity thanks to larger, internally ventilated lightweight sports brake discs -Reduction in the formation of a water film between the brake pad and brake disc thanks to countersinks and grooves. -Low weight, resulting in low unsprung masses. -Attractive appearance. -Emphasizes sportiness, especially with alloy wheels with open wheel design. -Not available as optional equipment

BMW

Item No.: 10008737

Manufacturer No.: 34206797598

In the M135i and M235i vehicles with standard brake system, the BMW lightweight sports brake discs can be installed on the front and rear axle without additional measures. In 335i and 335d as well as 435i and 435d vehicles with standard brakes, the BMW lightweight sports brake discs can be installed on the front axle without additional measures. On vehicles with 17" or 18" BMW M sports brakes (optional equipment ex works), the perforated and grooved BMW lightweight sports brake discs can be installed on the front and rear axle without additional measures. In the case of an accessory retrofit of the M Performance sports brake, the perforated and grooved BMW lightweight sports brake discs are already part of the respective retrofit kits. An entry in the vehicle documents is not required, as the brake system does not change in the registration-relevant data. -Reduction in the formation of a water film between the brake pad and brake disk thanks to countersinks and grooves. -Low weight, resulting in low unsprung masses. -Attractive appearance. -Emphasizes sportiness, especially with alloy wheels with an open wheel design. -The lightweight sports brake discs are suitable for individualizing the vehicle, as they cannot be configured as optional equipment ex works. It is recommended that new brake pads are also fitted when installing the BMW lightweight sports brake discs. The BMW lightweight sports brake disc, like the respective standard brake disc, is only approved in conjunction with at least 17" or 18" aluminum wheels (also in winter)!

BMW

Item No.: 10161340

Manufacturer No.: 34216887576

BMW

Item No.: 10031235

Manufacturer No.: 34216767682

BMW

Item No.: 10164862

Manufacturer No.: 34356792292

BMW

Item No.: 10161231

Manufacturer No.: 34216857151

BMW

Item No.: 10161232

Manufacturer No.: 34216857152

BMW

Item No.: 10160157

Manufacturer No.: 34206850536

M12X1,5X32 ZNS3

BMW

Item No.: 10165335

Manufacturer No.: 34416761292

BMW

Item No.: 10165334

Manufacturer No.: 34416761291

BMW

Item No.: 10165112

Manufacturer No.: 34410410823

BMW

Item No.: 10165113

Manufacturer No.: 34410410825

BMW

Item No.: 10165345

Manufacturer No.: 34416851439

BMW

Item No.: 10165343

Manufacturer No.: 34416851437

BMW

Item No.: 10165344

Manufacturer No.: 34416851438

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

To eliminate brake noise. Prevents seizure and corrosion. Facilitates assembly and disassembly. High-quality mineral grease with solid content. Very long-lasting and high lubricating performance -Service and repair product

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

Safety cleaner for brake parts cleaning and for various maintenance, repair and assembly work. Reduced health risk as n-hexane free. Removes dust, incrustations, oil, grease, resin, silicone and anti-corrosion coatings. Very good cleaning performance with minimal fire risk. Tested fire behavior, no afterburning, no flashback, lower explosion limit >1.5 vol %. Conservation of resources through the use of renewable raw materials. Application: -Maintenance and repair -Clutch repairs -Degreasing of all assembly parts -For heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work -reduced health risk as n-hexane-free* -Conserves resources through the use of renewable raw materials Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings -reduced risk of fire and fire consequences -formulation independently tested by TÜV Süd -state-of-the-art cleaning technology -Lowest hazard potential -Recommended product in accordance with the Hazardous Substances Ordinance (protection level 2) The surfaces to be treated must be mechanically cleaned of coarse dirt and sufficiently sprayed until the surface is clean and shiny. The treatment may need to be repeated in the event of heavy soiling.