Service, brakes

BMW

Item No.: 10033059

Manufacturer No.: 34107885486

410x36

BMW

Item No.: 10036351

Manufacturer No.: 34107885488

420x40

BMW

Item No.: 10039742

Manufacturer No.: 34107885487

420x40

BMW

Item No.: 10034571

Manufacturer No.: 34107885485

410x36

BMW

Item No.: 10039007

Manufacturer No.: 34107885482

BMW

Item No.: 10030872

Manufacturer No.: 34107885484

BMW

Item No.: 10009996

Manufacturer No.: 34108092822

The TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be taken into account: Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10030972

Manufacturer No.: 34357885510

BMW

Item No.: 10159951

Manufacturer No.: 34117845749

BMW

Item No.: 10160003

Manufacturer No.: 34118089941

BMW

Item No.: 10159131

Manufacturer No.: 34112284399

M12X1,5-10.9

BMW

Item No.: 10158758

Manufacturer No.: 34111123072

M8X12

BMW

Item No.: 10026365

Manufacturer No.: 34207885514

right Carbon/ceramic

BMW

Item No.: 10035191

Manufacturer No.: 34207885512

BMW

Item No.: 10026366

Manufacturer No.: 34207885513

left Carbon/ceramic

BMW

Item No.: 10032055

Manufacturer No.: 34207885511

BMW

Item No.: 10030223

Manufacturer No.: 34208873520

TX4007

BMW

Item No.: 10703628

Manufacturer No.: 34208842966

BMW

Item No.: 10037476

Manufacturer No.: 34207885509

BMW

Item No.: 10703746

Manufacturer No.: 34356770995

BMW

Item No.: 10158811

Manufacturer No.: 34111157041

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10412450

Manufacturer No.: 83192180000

3 g

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

To eliminate brake noise. Prevents seizure and corrosion. Facilitates assembly and disassembly. High-quality mineral grease with solid content. Very long-lasting and high lubricating performance -Service and repair product

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

Safety cleaner for brake parts cleaning and for various maintenance, repair and assembly work. Reduced health risk as n-hexane free. Removes dust, incrustations, oil, grease, resin, silicone and anti-corrosion coatings. Very good cleaning performance with minimal fire risk. Tested fire behavior, no afterburning, no flashback, lower explosion limit >1.5 vol %. Conservation of resources through the use of renewable raw materials. Application: -Maintenance and repair -Clutch repairs -Degreasing of all assembly parts -For heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work -reduced health risk as n-hexane-free* -Conserves resources through the use of renewable raw materials Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings -reduced risk of fire and fire consequences -formulation independently tested by TÜV Süd -state-of-the-art cleaning technology -Lowest hazard potential -Recommended product in accordance with the Hazardous Substances Ordinance (protection level 2) The surfaces to be treated must be mechanically cleaned of coarse dirt and sufficiently sprayed until the surface is clean and shiny. The treatment may need to be repeated in the event of heavy soiling.