Service, brakes

BMW

Item No.: 10159141

Manufacturer No.: 34112284802

410X38

BMW

Item No.: 10159127

Manufacturer No.: 34112284101

400X36

BMW

Item No.: 10159140

Manufacturer No.: 34112284801

410X38

BMW

Item No.: 10159128

Manufacturer No.: 34112284102

400X36

BMW

Item No.: 10159148

Manufacturer No.: 34112284869

BMW

Item No.: 10159129

Manufacturer No.: 34112284370

BMW

Item No.: 10009994

Manufacturer No.: 34112284465

The S4007 brake pad is derived from a proven long-distance racing pad used in motorsport. It was specially developed with increased thermal performance in mind and meets the requirements of ECE-R 13H (legal requirement in many countries). -Shorter braking distance. -Better brake response. -Higher thermal load capacity. -Reduced comfort: The brake pad can cause significantly more noise. However, the function is not restricted by this. The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out.

BMW

Item No.: 10164855

Manufacturer No.: 34356791958

BMW

Item No.: 10160843

Manufacturer No.: 34212284804

396x26mm

BMW

Item No.: 10160842

Manufacturer No.: 34212284803

396X26

BMW

Item No.: 10160829

Manufacturer No.: 34212284103

396X24

BMW

Item No.: 10160830

Manufacturer No.: 34212284104

396X24

BMW

Item No.: 10160834

Manufacturer No.: 34212284389

BMW

Item No.: 10017415

Manufacturer No.: 34212284466

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be observed: The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake disks (the brake disks of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10160835

Manufacturer No.: 34212284390

BMW

Item No.: 10164816

Manufacturer No.: 34352284343

BMW

Item No.: 10158758

Manufacturer No.: 34111123072

M8X12

BMW

Item No.: 10160646

Manufacturer No.: 34211161806

M8X14

BMW

Item No.: 10159130

Manufacturer No.: 34112284376

M12X1,5

BMW

Item No.: 10159131

Manufacturer No.: 34112284399

M12X1,5-10.9

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

To eliminate brake noise. Prevents seizure and corrosion. Facilitates assembly and disassembly. High-quality mineral grease with solid content. Very long-lasting and high lubricating performance -Service and repair product

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

Safety cleaner for brake parts cleaning and for various maintenance, repair and assembly work. Reduced health risk as n-hexane free. Removes dust, incrustations, oil, grease, resin, silicone and anti-corrosion coatings. Very good cleaning performance with minimal fire risk. Tested fire behavior, no afterburning, no flashback, lower explosion limit >1.5 vol %. Conservation of resources through the use of renewable raw materials. Application: -Maintenance and repair -Clutch repairs -Degreasing of all assembly parts -For heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work -reduced health risk as n-hexane-free* -Conserves resources through the use of renewable raw materials Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings -reduced risk of fire and fire consequences -formulation independently tested by TÜV Süd -state-of-the-art cleaning technology -Lowest hazard potential -Recommended product in accordance with the Hazardous Substances Ordinance (protection level 2) The surfaces to be treated must be mechanically cleaned of coarse dirt and sufficiently sprayed until the surface is clean and shiny. The treatment may need to be repeated in the event of heavy soiling.