Select a vehicle in the vehicle garage to display matching products.
Engine
BMW
Item No.: 10001110
Manufacturer No.: 83195A260A6
The brake cleaner cleans quickly and thoroughly. It removes heavy dirt, dust and oil with a high-pressure spray on disc brakes, drum brakes and clutch. The brake cleaner does not contain acetone and dries quickly, so the car can be reused immediately after cleaning and checking the brakes. Caution: The brake cleaner is harmful to health and highly flammable. -ideal for quickly removing oil, grease, resin and silicone -Reliably binds and washes away abrasion dust -generous ventilation -high spray pressure for optimized cleaning effect even in hard-to-reach areas It cleans reliably: -disc brakes (discs, pads, calipers, cylinders and pistons) -drum brakes (brake shoes, linings, drums, brake plates, cylinders and springs) -clutches (pressure plate and driver disk) Recommended cleaning procedure: -first remove heavy soiling -Shake the can well before use -Spray the area to be cleaned generously and allow to dry. First spray with light pressure to penetrate the dirt on the blocks. Then spray with full pressure to rinse off the dirt. Test the brakes after fitting.
4-5 Working Days
BMW
Item No.: 10813879
Manufacturer No.: 83195B54E41
The brake cleaner, acetone-free XL cleans quickly and thoroughly. It cleans heavy dirt, dust and oil from disc brakes, drum brakes and clutches. -ideal for quickly removing oil, grease, resin and silicone -Reliably binds and washes away abrasion dust -generous ventilation -does not contain acetone
4-5 Working Days
2-4 Working Days
BMW Motorrad
Item No.: 10068100
Manufacturer No.: 07559062476
Resistant to aggressive media such as acids and alkalis, as well as cold and hot water. -High elastomer compatibility -Optimum wear and corrosion protection -High pressure absorption capacity -Extremely adhesive
4-5 Working Days
BMW Motorrad
Item No.: 10068101
Manufacturer No.: 07580397777
Silicone sealant, resistant to all liquids. -resistant to gas leaks -very good adhesion without primer non-corrosive
2-4 Working Days
BMW
Item No.: 10412457
Manufacturer No.: 83192210339
For securing and sealing threaded connections that have to be dismantled using normal hand tools. The product is oil-resistant and hardens in the absence of air (anaerobic) between close-fitting metal surfaces and prevents self-loosening and leaks caused by shocks and vibrations. Good adhesion and suitable for active metals (e.g. brass, copper) and passive materials (e.g. stainless steel), temperature resistance up to 200°C. -Suitable for all metals -Connections can be dismantled with hand tools
4-5 Working Days
BMW
Item No.: 10152170
Manufacturer No.: 33112328736
For securing and sealing pipe threads and fittings made of metals, particularly suitable for stainless steel, without the need to activate the surfaces.
4-5 Working Days
BMW
Item No.: 10412456
Manufacturer No.: 83192210337
For connections up to M48 for securing and sealing bolts and nuts against impact and vibration. Ideal for permanently securing stud bolts on engine blocks and pump housings. -Fast hardening -for systems that do not have to be dismantled regularly for maintenance
2-4 Working Days
BMW Motorrad
Item No.: 10412376
Manufacturer No.: 83122405891
The BMW Motorrad engine oil ADVANTEC Pro, viscosity 15W-50, was developed exclusively for BMW, tested by BMW and perfectly matched to the high-performance engines of BMW Motorrad. Like all ADVANTEC oils, it meets the highest standards for lubricants. The original BMW engine oil is available in a 1-liter bottle. -Optimal oiling of the engine. -Full power output with optimum engine protection. -Extends the service life of the engine. -Maintains the value of the vehicle.
Not available
Not available
2-4 Working Days
€12.70
2-4 Working Days
4-5 Working Days
Not available
These products are not intended for assembly by an end user. Installation is to be carried out exclusively by persons with appropriate specialist training or by a specialist automotive company.