Select your vehicle to see if this item fits.
BMW
LED interior light package large
Item No.: 10010292
Manufacturer No.: 63122212788
2-4 Working Days
Description
The LED indoor lighting package for use in indoor luminaires boasts extremely low energy consumption and a very long service life. The daylight white light color (TF: 5700 K) creates a modern room ambience and pleasant brightness. A specially calculated lens produces a beam characteristic comparable to that of an incandescent lamp. The LED can be plugged directly into the existing socket of the interior light (reading light, interior light or footwell light). Its ballast electronics are matched to BMW Group vehicle electrical systems, so no additional ballast resistors are required. Rectifier and reverse polarity protection are also included. -LED for use in interior lights. -Direct use in existing socket. -Light color daylight white for a modern look. -No additional ballast resistors required, rectifier and reverse polarity protection included. -Specially manufactured lens resembles the radiation characteristics of an incandescent lamp. -Very long service life with extremely low energy consumption. Material: Temperature-resistant housing thanks to the use of thermally conductive polymer. Technical information: -For all BMW and vehicles except 1 Series and 3 Series with special equipment light package. -Replaces W3W, W5W and W6W bulbs with T10 base. -Light color: daylight white (TF: 5700 K). Notes: -LED interior light package large for use in roof lights (6 LED modules round) and for footwell and door lights (4 LED modules flat). -Use in exterior lights is not permitted on public roads. -Replacement of festoon bulbs (C5W, C6W) is not possible due to different design.
Product specifications
Texture & appearance
Shipping information
Compatibility & Installation
The following vehicle list serves as an overview. Additional vehicle-specific conditions may apply. Select a vehicle in the garage to check them.
| Brand | Series | Development Code | Model | Type Code | Engine | Transmission | Power Transmission | Production Date |
|---|---|---|---|---|---|---|---|---|
| BMW | 1' | E81 | 116d | UK51 | N47 | Manual | Rear wheel drive | 3/1/2009 - 12/31/2011 |
| BMW | 1' | E81 | 116d | UK52 | N47 | Manual | Rear wheel drive | 3/1/2009 - 12/31/2011 |
| BMW | 1' | E81 | 116i | UA11 | N45T | Manual | Rear wheel drive | 9/1/2007 - 12/31/2011 |
| BMW | 1' | E81 | 116i | UA12 | N45T | Manual | Rear wheel drive | 9/1/2007 - 12/31/2011 |
| BMW | 1' | E81 | 116i | UA21 | N45T | Automatic | Rear wheel drive | 9/1/2007 - 12/31/2011 |
| BMW | 1' | E81 | 116i | UB71 | N43 | Manual | Rear wheel drive | 9/1/2007 - 12/31/2011 |
| BMW | 1' | E81 | 116i | UB72 | N43 | Manual | Rear wheel drive | 9/1/2007 - 12/31/2011 |
| BMW | 1' | E81 | 116i | UB81 | N43 | Automatic | Rear wheel drive | 9/1/2007 - 12/31/2011 |
| BMW | 1' | E81 | 116i | UB82 | N43 | Automatic | Rear wheel drive | 9/1/2007 - 12/31/2011 |
| BMW | 1' | E81 | 116i | UK31 | N43 | Manual | Rear wheel drive | 3/1/2009 - 12/31/2011 |
Part of
Reviews
Einfach einzubauen, Erwartung an Lichtleistung eingehalten. Montagetip: Sollten die Original Lampen schlecht aus der Fassung gehen, einfach einen Streifen Tesa Gewebetape nutzen, um die Lampe "kleben" und damit die festsitzende Lampe entfernen, ohne den Glaskolben zubeschädigen.
Review by 1er Hip
Published on 03/14/14