Service, brakes

BMW

Item No.: 10159149

Manufacturer No.: 34112284901

395X36

BMW

Item No.: 10159543

Manufacturer No.: 34116789069

395X36

BMW

Item No.: 10159798

Manufacturer No.: 34116898727

395X36

BMW

Item No.: 10159544

Manufacturer No.: 34116789070

395X36

BMW

Item No.: 10159150

Manufacturer No.: 34112284902

395X36

BMW

Item No.: 10159799

Manufacturer No.: 34116898728

395X36

BMW

Item No.: 10158758

Manufacturer No.: 34111123072

M8X12

BMW

Item No.: 10160646

Manufacturer No.: 34211161806

M8X14

BMW

Item No.: 10159597

Manufacturer No.: 34116799964

BMW

Item No.: 10159969

Manufacturer No.: 34117852969

BMW

Item No.: 10017453

Manufacturer No.: 34112365765

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be noted: -Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the altered friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10164872

Manufacturer No.: 34356792568

BMW

Item No.: 10164835

Manufacturer No.: 34356789080

BMW

Item No.: 10159948

Manufacturer No.: 34117845746

BMW

Item No.: 10159951

Manufacturer No.: 34117845749

BMW

Item No.: 10159498

Manufacturer No.: 34116778234

M12X1,5X43 ZNS3

BMW

Item No.: 10160848

Manufacturer No.: 34212284903

385X24

BMW

Item No.: 10160849

Manufacturer No.: 34212284904

385X24

BMW

Item No.: 10161195

Manufacturer No.: 34216795318

385X24

BMW

Item No.: 10008725

Manufacturer No.: 34212365766

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be noted: -Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the altered friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10161194

Manufacturer No.: 34216794879

BMW

Item No.: 10164873

Manufacturer No.: 34356792571

BMW

Item No.: 10164850

Manufacturer No.: 34356789505

BMW

Item No.: 10161155

Manufacturer No.: 34216789352

schwarz

BMW

Item No.: 10159498

Manufacturer No.: 34116778234

M12X1,5X43 ZNS3

BMW

Item No.: 10165340

Manufacturer No.: 34416780041

BMW

Item No.: 10165110

Manufacturer No.: 34410038346

BMW

Item No.: 10165345

Manufacturer No.: 34416851439

BMW

Item No.: 10165343

Manufacturer No.: 34416851437

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

To eliminate brake noise. Prevents seizure and corrosion. Facilitates assembly and disassembly. High-quality mineral grease with solid content. Very long-lasting and high lubricating performance -Service and repair product

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

Safety cleaner for brake parts cleaning and for various maintenance, repair and assembly work. Reduced health risk as n-hexane free. Removes dust, incrustations, oil, grease, resin, silicone and anti-corrosion coatings. Very good cleaning performance with minimal fire risk. Tested fire behavior, no afterburning, no flashback, lower explosion limit >1.5 vol %. Conservation of resources through the use of renewable raw materials. Application: -Maintenance and repair -Clutch repairs -Degreasing of all assembly parts -For heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work -reduced health risk as n-hexane-free* -Conserves resources through the use of renewable raw materials Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings -reduced risk of fire and fire consequences -formulation independently tested by TÜV Süd -state-of-the-art cleaning technology -Lowest hazard potential -Recommended product in accordance with the Hazardous Substances Ordinance (protection level 2) The surfaces to be treated must be mechanically cleaned of coarse dirt and sufficiently sprayed until the surface is clean and shiny. The treatment may need to be repeated in the event of heavy soiling.