J-1772 (AC) Adapter

Description

The J-1772 (AC) adapter is ideal for Type 1 AC charging stations with an SAE-J1772-2024 interface and vehicles with an NACS SAE-J3400-2024 interface. The adapter was developed in accordance with BMW Group quality standards and international standards. -Design and Function: The BMW-designed charging adapter is ergonomically shaped, compact, robust, and offers IP67 protection. -Plug & Play: No complicated installation is required. -Maintenance: Wipe down, clean, and maintain regularly. Ensure that the adapter is completely disconnected from the power source and the vehicle before cleaning it. Environmental Conditions: -Ambient temperature range: -40 °C to +50 °C -Humidity: 5% to 95% -IP protection class: IP 67 Technical Specifications: -Rated current: 64 A -Mains voltage: 300 V AC -Length: 129 mm -Width: 61 mm -Height: 93 mm Notes: -Be sure to select the correct adapter for your vehicle and your specific application. Please consult the corresponding user manual. -The enclosed Safety Guide contains important safety information as well as the QR code or link to the user manual. Safety Instructions: -The user manual provides important information about the NACS adapters, which must be strictly followed when using and maintaining the adapter. Always observe basic safety precautions when using electrical products. Please read the user manual thoroughly before using the charging adapter. Ignoring the instructions and warnings in this document may result in fire, electric shock, serious injury, or even death. Do not touch the contacts of the plug, adapter, or socket with your fingers. Do not use this product if the flexible charging cable, the plug, the vehicle inlet, or the adapter itself has damaged insulation, a damaged housing, or if internal parts—including the wiring—are exposed. Please do not use the adapter with a charging device or electric vehicle that may exceed the adapter’s rated voltage or current. Some combinations of electric vehicles and charging devices may operate at different voltages or experience brief overloads and are designed for standard connections between charging devices and electric vehicles. Using the adapter in such situations may lead to unsafe conditions, such as fire, burns, or high-voltage hazards. -The adapter is not compatible with the following models and must not be used: MINI Cooper E, MINI Cooper SE, MINI John Cooper Works E (F56, F57, J01), MINI Aceman E, MINI Aceman SE, MINI John Cooper Works Aceman E (J05), BMW i3, first generation (I01) -Use the adapter exclusively with the type of current specified in the technical data, whether direct current or alternating current. -Always insert the charging plug fully into the adapter first, and only then plug the adapter into the vehicle’s charging port. -Do not remove any markings such as safety symbols, warnings, labels, or cable markings. -Do not use this product if it is damaged. -Please do not open, disassemble, repair, or modify the product. -Please do not use extension cords with this product. -Please do not use this product in wet conditions. -Please do not touch this product with wet hands. -Please do not disconnect the adapter from the vehicle while it is actively charging. -Avoid stepping on or driving over the product. -Avoid direct sunlight and high temperatures. -The adapter may become hot during operation. -Handle the product with care. Improper use may cause permanent or irreversible damage. -The surface of the adapter may become hot. -Operate the product only within a temperature range of -40 °C to +50 °C.

Reviews