Service, brakes

BMW

Item No.: 10017307

Manufacturer No.: 34108093717

The following parts are also essential: brake pads, brake pad sensor and brake pad paste.

BMW

Item No.: 10703513

Manufacturer No.: 34107889662

380X36

BMW

Item No.: 10017308

Manufacturer No.: 34108093718

The following parts are also essential: brake pads, brake pad sensor and brake pad paste.

BMW

Item No.: 10703512

Manufacturer No.: 34107889661

380X36

BMW

Item No.: 10158537

Manufacturer No.: 34108093709

The installation of M Performance sports brake pads also results in increased stress on the brake discs: Due to the changed friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is absolutely essential to replace the brake disc if there are cracks of 13 mm or more, even before the brake pad wears out. The following parts are also essential: - Brake pads - Brake pad sensor - Brake pad paste.

BMW

Item No.: 10158538

Manufacturer No.: 34108093710

The installation of M Performance sports brake pads also results in increased stress on the brake discs: Due to the changed friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is absolutely essential to replace the brake disc if there are cracks of 13 mm or more, even before the brake pad wears out. The following parts are also essential: - Brake pads - Brake pad sensor - Brake pad paste.

BMW

Item No.: 10158521

Manufacturer No.: 34107884975

BMW

Item No.: 10158520

Manufacturer No.: 34107883265

BMW

Item No.: 10158536

Manufacturer No.: 34108093705

BMW

Item No.: 10017499

Manufacturer No.: 34109502514

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be noted: Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake disks (the brake disks of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10164888

Manufacturer No.: 34356870349

BMW

Item No.: 10159951

Manufacturer No.: 34117845749

BMW

Item No.: 10160003

Manufacturer No.: 34118089941

BMW

Item No.: 10159131

Manufacturer No.: 34112284399

M12X1,5-10.9

BMW

Item No.: 10158758

Manufacturer No.: 34111123072

M8X12

BMW

Item No.: 10160370

Manufacturer No.: 34208093730

The installation of M Performance sports brake pads also results in increased stress on the brake discs: Due to the changed friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is absolutely essential to replace the brake disc if there are cracks of 13 mm or more, even before the brake pad wears out. The following parts are also essential: - Brake pads - Brake pad sensor - Brake pad paste.

BMW

Item No.: 10160375

Manufacturer No.: 34208093740

The following parts are also essential: - Brake pads - Brake pad sensor - Brake pad paste.

BMW

Item No.: 10703600

Manufacturer No.: 34207889663

BMW

Item No.: 10703601

Manufacturer No.: 34207889664

BMW

Item No.: 10160374

Manufacturer No.: 34208093739

The following parts are also essential: - Brake pads - Brake pad sensor - Brake pad paste.

BMW

Item No.: 10160369

Manufacturer No.: 34208093729

The installation of M Performance sports brake pads also results in increased stress on the brake discs: Due to the changed friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is absolutely essential to replace the brake disc if there are cracks of 13 mm or more, even before the brake pad wears out. The following parts are also essential: - Brake pads - Brake pad sensor - Brake pad paste.

BMW

Item No.: 10017415

Manufacturer No.: 34212284466

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be observed: The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake disks (the brake disks of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10160368

Manufacturer No.: 34208093728

BMW

Item No.: 10160373

Manufacturer No.: 34208093737

BMW

Item No.: 10160351

Manufacturer No.: 34207883273

BMW

Item No.: 10160352

Manufacturer No.: 34207884379

BMW

Item No.: 10160353

Manufacturer No.: 34207884979

BMW

Item No.: 10164913

Manufacturer No.: 34358095575

BMW

Item No.: 10160158

Manufacturer No.: 34206850560

M8X22

BMW

Item No.: 10158671

Manufacturer No.: 34108838589

M12X1,5X43 ZNS3

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

To eliminate brake noise. Prevents seizure and corrosion. Facilitates assembly and disassembly. High-quality mineral grease with solid content. Very long-lasting and high lubricating performance -Service and repair product

BMW

Item No.: 10412450

Manufacturer No.: 83192180000

3 g

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

Safety cleaner for brake parts cleaning and for various maintenance, repair and assembly work. Reduced health risk as n-hexane free. Removes dust, incrustations, oil, grease, resin, silicone and anti-corrosion coatings. Very good cleaning performance with minimal fire risk. Tested fire behavior, no afterburning, no flashback, lower explosion limit >1.5 vol %. Conservation of resources through the use of renewable raw materials. Application: -Maintenance and repair -Clutch repairs -Degreasing of all assembly parts -For heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work -reduced health risk as n-hexane-free* -Conserves resources through the use of renewable raw materials Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings -reduced risk of fire and fire consequences -formulation independently tested by TÜV Süd -state-of-the-art cleaning technology -Lowest hazard potential -Recommended product in accordance with the Hazardous Substances Ordinance (protection level 2) The surfaces to be treated must be mechanically cleaned of coarse dirt and sufficiently sprayed until the surface is clean and shiny. The treatment may need to be repeated in the event of heavy soiling.