Engine

BMW Motorrad

Item No.: 10069531

Manufacturer No.: 11009480367

BMW Motorrad

Item No.: 10069538

Manufacturer No.: 11009831936

BMW Motorrad

Item No.: 10035202

Manufacturer No.: 11009898621

China

BMW Motorrad

Item No.: 10412375

Manufacturer No.: 83122405887

The ADVANTEC Ultimate engine oil with a viscosity of 5W-40 was developed exclusively for BMW, tested by BMW and perfectly matched to the high-performance engines of BMW Motorrad. Like all ADVANTEC oils, it meets the highest standards for lubricants. The original BMW engine oil is available in a 1-liter bottle. -Optimal oiling of the engine. -Full power output with optimum engine protection. -Extends the service life of the engine. -Maintains the value of the vehicle.

BMW Motorrad

Item No.: 10412377

Manufacturer No.: 83122406462

5W-40, 1L

BMW Motorrad

Item No.: 10412601

Manufacturer No.: 83229407768

Rear axle gear oil Synthetik OSP is a fully synthetic SAE 75W-90 rear axle gear oil. BMW Synthetik OSP can be recommended for most passenger car rear axle transmissions without limited slip differential where API GL5 lubricants are required. Rear Axle Transmission Oil Synthetic OSP is approved by BMW for use in rear axles without limited slip differential. It can also be used in rear axles equipped with a viscous coupling. It should not be used in rear axles with limited slip differential. -prevents very high temperature increases and reduces the risk of wear -Reduction of torque losses improves the efficiency of the final drive -optimal lubrication maintains the performance of the rear axle and extends its service life

BMW

Item No.: 10037401

Manufacturer No.: 83229401720

1000ML, TU

BMW Motorrad

Item No.: 10412586

Manufacturer No.: 83222445460

Rear axle gear oil Synthetik OSP is a fully synthetic SAE 75W-90 rear axle gear oil. BMW Synthetik OSP can be recommended for most passenger car rear axle transmissions without limited slip differential where API GL5 lubricants are required. Rear Axle Transmission Oil Synthetic OSP is approved by BMW for use in rear axles without limited slip differential. It can also be used in rear axles equipped with a viscous coupling. It should not be used in rear axles with limited slip differential. -prevents very high temperature increases and reduces the risk of wear -Reduction of torque losses improves the efficiency of the final drive -optimal lubrication maintains the performance of the rear axle and extends its service life