Service, brakes

BMW

Item No.: 10160646

Manufacturer No.: 34211161806

M8X14

BMW

Item No.: 10159546

Manufacturer No.: 34116789293

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10161101

Manufacturer No.: 34216775295

402X30

BMW

Item No.: 10164857

Manufacturer No.: 34356791960

BMW

Item No.: 10161187

Manufacturer No.: 34216793777

BMW

Item No.: 10158378

Manufacturer No.: 34106864424

M12X1,5X43 ZNS3

BMW

Item No.: 10165342

Manufacturer No.: 34416790186

BMW

Item No.: 10165110

Manufacturer No.: 34410038346

BMW

Item No.: 10165345

Manufacturer No.: 34416851439

BMW

Item No.: 10165343

Manufacturer No.: 34416851437

BMW

Item No.: 10412445

Manufacturer No.: 83192158851

To eliminate brake noise. Prevents seizure and corrosion. Facilitates assembly and disassembly. High-quality mineral grease with solid content. Very long-lasting and high lubricating performance -Service and repair product

BMW

Item No.: 10412488

Manufacturer No.: 83192362037

Safety cleaner for brake parts cleaning and for various maintenance, repair and assembly work. Reduced health risk as n-hexane free. Removes dust, incrustations, oil, grease, resin, silicone and anti-corrosion coatings. Very good cleaning performance with minimal fire risk. Tested fire behavior, no afterburning, no flashback, lower explosion limit >1.5 vol %. Conservation of resources through the use of renewable raw materials. Application: -Maintenance and repair -Clutch repairs -Degreasing of all assembly parts -For heavily soiled or oily/greasy parts -Safety cleaner 2.0 for maintenance, repair and assembly work -reduced health risk as n-hexane-free* -Conserves resources through the use of renewable raw materials Removes dust, incrustations, oil, grease, resin and anti-corrosion coatings -reduced risk of fire and fire consequences -formulation independently tested by TÜV Süd -state-of-the-art cleaning technology -Lowest hazard potential -Recommended product in accordance with the Hazardous Substances Ordinance (protection level 2) The surfaces to be treated must be mechanically cleaned of coarse dirt and sufficiently sprayed until the surface is clean and shiny. The treatment may need to be repeated in the event of heavy soiling.