M Performance aerodynamics accessories

BMW

Item No.: 10008049

Manufacturer No.: 51192475168

Matching the optional carbon package, the M Performance front attachment emphasizes the sporty and attractive appearance of the BMW M3 or M4. It was specially developed for the M3 Sedan and the M4 Coupé and can also be installed without the optional carbon package. -The front attachment gives the vehicle a striking and characteristic front view. -The M Performance exterior components have optimum aerodynamics and enhance the sporty handling. -The front attachment has been tested for pedestrian protection requirements, among other things. All legal requirements are met. -The carbon components are made of carbon fiber reinforced plastic (CFRP) and are sealed with clear lacquer. -The installation of the rear spoiler is not mandatory for the installation of the front attachment, but optimum driving performance can only be achieved by combining the two products.

BMW

Item No.: 10009124

Manufacturer No.: 51115A08FE9

Matching the optional carbon package, the M Performance Aero Flicks emphasize the sporty appearance of the BMW M3 or M4. The M Performance Aero Flicks made of carbon give the vehicle a striking and characteristic front view. All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon package. -attractive, sporty look -Optimally matched to the vehicle and the optional carbon package -easy installation -Manufacture of the carbon parts in elaborate manual work -optimal aerodynamics -enhance the sporty driving behavior

BMW

Item No.: 10009123

Manufacturer No.: 51115A08FF9

Matching the optional carbon package, the M Performance Aero Flicks emphasize the sporty appearance of the BMW M3 or M4. The M Performance Aero Flicks made of carbon give the vehicle a striking and characteristic front view. All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon package. -attractive, sporty look -Optimally matched to the vehicle and the optional carbon package -easy installation -Manufacture of the carbon parts in elaborate manual work -optimal aerodynamics -enhance the sporty driving behavior

BMW

Item No.: 10206446

Manufacturer No.: 51118074773

CFK

BMW

Item No.: 10206447

Manufacturer No.: 51118074774

CFK

BMW

Item No.: 10008401

Manufacturer No.: 51132469622

Parts of the M Performance side grilles (gills) are made of high-quality carbon and emphasize the sporty look of the vehicle. The M Performance gills on the side panel are specially developed for the M4 Coupé and can also be installed without the optional carbon package. -unique differentiation option thanks to first-time design in high-quality visible carbon fiber -special development for the M4 Coupé guarantees 100% accuracy of fit -perfect adaptation to the vehicle design -Optimum interaction with all other M Performance Parts -Complex production of the components for a high-quality appearance -Tested and approved according to strict BMW Group quality guidelines -Fulfillment of all legal requirements -simple installation as with the standard components Material details: Parts of the side trim strips are made of carbon fiber-reinforced epoxy resin. After the carbon parts have hardened, a clear coat is applied to emphasize the depth effect of the 3K fabric and protect the matrix material (epoxy resin) from environmental influences.

BMW

Item No.: 10008402

Manufacturer No.: 51132469621

Parts of the M Performance side grilles (gills) are made of high-quality carbon and emphasize the sporty look of the vehicle. The M Performance side panel gills are specially developed for the M3 Sedan and can also be installed without the optional carbon package. -unique differentiation option thanks to first-time design in high-quality visible carbon fiber -special development for the M3 Sedan guarantees 100% accuracy of fit -perfect adaptation to the vehicle design -optimal interaction with all other M Performance Parts -Complex production of the components for a high-quality appearance -Tested and approved according to strict BMW Group quality guidelines -Fulfillment of all legal requirements -simple installation as with the standard components Material details: Parts of the side trim strips are made of carbon fiber-reinforced epoxy resin. After the carbon parts have hardened, a clear coat is applied to emphasize the depth effect of the 3K fabric and protect the matrix material (epoxy resin) from environmental influences.

BMW

Item No.: 10008400

Manufacturer No.: 51132469623

Parts of the M Performance side grilles (gills) are made of high-quality carbon and emphasize the sporty look of the vehicle. The M Performance gills on the side panel are specially developed for the M4 Coupé and can also be installed without the optional carbon package. -unique differentiation option thanks to first-time design in high-quality visible carbon fiber -special development for the M4 Coupé guarantees 100% accuracy of fit -perfect adaptation to the vehicle design -Optimum interaction with all other M Performance Parts -Complex production of the components for a high-quality appearance -Tested and approved according to strict BMW Group quality guidelines -Fulfillment of all legal requirements -simple installation as with the standard components Material details: Parts of the side trim strips are made of carbon fiber-reinforced epoxy resin. After the carbon parts have hardened, a clear coat is applied to emphasize the depth effect of the 3K fabric and protect the matrix material (epoxy resin) from environmental influences.

BMW

Item No.: 10008403

Manufacturer No.: 51132469620

Parts of the M Performance side grilles (gills) are made of high-quality carbon and emphasize the sporty look of the vehicle. The M Performance side panel gills are specially developed for the M3 Sedan and can also be installed without the optional carbon package. -unique differentiation option thanks to first-time design in high-quality visible carbon fiber -special development for the M3 Sedan guarantees 100% accuracy of fit -perfect adaptation to the vehicle design -optimal interaction with all other M Performance Parts -Complex production of the components for a high-quality appearance -Tested and approved according to strict BMW Group quality guidelines -Fulfillment of all legal requirements -simple installation as with the standard components Material details: Parts of the side trim strips are made of carbon fiber-reinforced epoxy resin. After the carbon parts have hardened, a clear coat is applied to emphasize the depth effect of the 3K fabric and protect the matrix material (epoxy resin) from environmental influences.

BMW

Item No.: 10229846

Manufacturer No.: 51168075065

BMW

Item No.: 10229847

Manufacturer No.: 51168075066

BMW

Item No.: 10017537

Manufacturer No.: 51168075063

The cover caps are made of high-quality carbon and emphasize the sporty appearance of the vehicle. -Attractive, sporty look. -Optimal matching to the vehicle. -Easy installation. -The M Performance aerodynamic and exterior components are perfectly matched in technical terms. -The shape and design of the components have been specially developed for the vehicles. The parts fit perfectly into the geometry and appearance. -The distinctive parts represent a clear differentiation from the production vehicle. -The elaborate production of the parts gives the components a high-quality appearance. -All Original M Performance aerodynamic and exterior components have been tested and approved in accordance with the strict BMW Group quality guidelines. -Only Original BMW Accessories guarantee a perfect fit. -All exterior components have already been homologated with the complete vehicle, a separate TÜV registration is not necessary. The front attachment meets all legal requirements for pedestrian protection. -Only original BMW accessories protect against loss of warranty in the event of damage. Notes: -The described circumferences fit the BMW 2 series with M sports package or M aerodynamic package. -All parts must be checked for accuracy of fit before installation on the vehicle.

BMW

Item No.: 10017538

Manufacturer No.: 51168075064

The cover caps are made of high-quality carbon and emphasize the sporty appearance of the vehicle. -Attractive, sporty look. -Optimal matching to the vehicle. -Easy installation. -The M Performance aerodynamic and exterior components are perfectly matched in technical terms. -The shape and design of the components have been specially developed for the vehicles. The parts fit perfectly into the geometry and appearance. -The distinctive parts represent a clear differentiation from the production vehicle. -The elaborate production of the parts gives the components a high-quality appearance. -All Original M Performance aerodynamic and exterior components have been tested and approved in accordance with the strict BMW Group quality guidelines. -Only Original BMW Accessories guarantee a perfect fit. -All exterior components have already been homologated with the complete vehicle, a separate TÜV registration is not necessary. The front attachment meets all legal requirements for pedestrian protection. -Only original BMW accessories protect against loss of warranty in the event of damage. Notes: -The described circumferences fit the BMW 2 series with M sports package or M aerodynamic package. -All parts must be checked for accuracy of fit before installation on the vehicle.

BMW

Item No.: 10009113

Manufacturer No.: 51192473415

Matching the optional carbon package, the M Performance carbon sill inserts emphasize the sporty appearance of the BMW M4 Coupé. The M Performance sill inserts are specially developed for the M4 Coupé and can also be installed without the optional carbon package. -attractive, sporty look -Optimally matched to the M4 Coupé and the optional carbon package -easy installation -Manufactured in elaborate manual work -give the M4 Coupé even more length -unique differentiation option -special development for the M4 Coupé guarantees 100% accuracy of fit -perfect adaptation to the vehicle design -optimal interaction with all other M Performance Parts -Tested and approved according to strict BMW Group quality guidelines

BMW

Item No.: 10009114

Manufacturer No.: 51192473414

Matching the optional carbon package, the M Performance carbon sill inserts emphasize the sporty appearance of the BMW M4 Coupé. The M Performance sill inserts are specially developed for the M4 Coupé and can also be installed without the optional carbon package. -attractive, sporty look -Optimally matched to the M4 Coupé and the optional carbon package -easy installation -Manufactured in elaborate manual work -give the M4 Coupé even more length -unique differentiation option -special development for the M4 Coupé guarantees 100% accuracy of fit -perfect adaptation to the vehicle design -optimal interaction with all other M Performance Parts -Tested and approved according to strict BMW Group quality guidelines

BMW

Item No.: 10009112

Manufacturer No.: 51192473040

Matching the optional carbon package, the M Performance carbon sill inserts emphasize the sporty appearance of the BMW M4 Coupé. The M Performance sill inserts are specially developed for the M3 Sedan and can also be installed without the optional carbon fiber package. -attractive, sporty look -optimally matched to the M3 Sedan and the optional carbon fiber package -easy installation -Manufactured in elaborate manual work -gives the M3 Sedan even more length -unique differentiation option -special development for the M3 Sedan guarantees 100% accuracy of fit -perfect adaptation to the vehicle design -optimal interaction with all other M Performance Parts -Tested and approved according to strict BMW Group quality guidelines

BMW

Item No.: 10009111

Manufacturer No.: 51192473041

Matching the optional carbon package, the M Performance carbon sill inserts emphasize the sporty appearance of the BMW M4 Coupé. The M Performance sill inserts are specially developed for the M3 Sedan and can also be installed without the optional carbon fiber package. -attractive, sporty look -optimally matched to the M3 Sedan and the optional carbon fiber package -easy installation -Manufactured in elaborate manual work -gives the M3 Sedan even more length -unique differentiation option -special development for the M3 Sedan guarantees 100% accuracy of fit -perfect adaptation to the vehicle design -optimal interaction with all other M Performance Parts -Tested and approved according to strict BMW Group quality guidelines

BMW

Item No.: 10008590

Manufacturer No.: 51142461811

The M Performance lettering sticker is perfectly matched to the Frozen Black side skirt foiling or the Black high-gloss side skirt attachment. It adds an additional visual highlight and reinforces the individual appearance on the side of the vehicle. -Perfectly matched to the vehicle design. -Matches other M Performance components.

BMW

Item No.: 10008123

Manufacturer No.: 51472472521

The original BMW M Performance door sill trims are finished with a carbon insert and enhance the vehicle with their high-quality, sporty look. The carbon insert features a striking, colorful M Performance imprint. -Material: ABS carrier with painted carbon insert -give the vehicle an individual character -Underline the sporty design of the vehicle -perfectly round off the M Performance exterior package -optimally and precisely matched to the vehicle geometry -easy installation in just 15 minutes -as a replacement for the M Sport package trim (M trim) and basic trim -identical on the left (driver's side) and right (passenger side)

BMW

Item No.: 10008015

Manufacturer No.: 51472472520

The original BMW M Performance door sill trims are finished with a carbon inlay and enhance the vehicle with their high-quality, sporty look. The carbon inlay features a striking, colorful M Performance imprint. -Material: Supports made of ABS with painted carbon inlay -give the vehicle an individual character -underline the sporty design of the vehicle -perfectly round off the M Performance exterior package -optimally and precisely matched to the vehicle geometry -Easy installation in just 15 minutes -as a replacement for M Sport package trim (M trim) and base trim -left (driver's side) and right (passenger's side) identical in construction

BMW

Item No.: 10017431

Manufacturer No.: 65205A59AC9

The antenna cover made of aramid fiber-reinforced plastic is a visual and functional highlight on the vehicle roof. Due to the extreme optical similarity between aramid fiber and carbon fiber, this product completes the "carbon" look of vehicles with a carbon package or other carbon exterior components. As aramid has a high permeability for electromagnetic waves, the functionality of the antenna is maintained. Carbon, on the other hand, has a shielding effect and cannot be used for antenna cladding. -The innovative material enables full functionality with a sporty, carbon-like look. -The antenna cover rounds off the carbon exterior portfolio perfectly. The aramid antenna cover is particularly durable and corrosion-resistant. Material: -Aramid" is the term BMW uses for the aramid fiber-reinforced plastic used for special accessory exterior components, similar to the term "carbon" for carbon fiber-reinforced plastic. Aramid is a high-quality fiber composite material that is very similar to carbon fiber in terms of its appearance and processing. In contrast to carbon, the components made from it have a high electromagnetic permeability. -Aramid has a lower density than carbon and is therefore slightly lighter than carbon. -Until now, aramid fibers have been used mainly in rallying (underbody protection) or sailing (carbon-aramid hybrid sails) or in ballistic protection for bulletproof vests or armored vehicles.

BMW

Item No.: 10017429

Manufacturer No.: 65205A59AB3

The antenna cover made of aramid fiber-reinforced plastic is a visual and functional highlight on the vehicle roof. Due to the extreme optical similarity between aramid fiber and carbon fiber, this product completes the "carbon" look of vehicles with a carbon package or other carbon exterior components. As aramid has a high permeability for electromagnetic waves, the functionality of the antenna is maintained. Carbon, on the other hand, has a shielding effect and cannot be used for antenna cladding. -The innovative material enables full functionality with a sporty, carbon-like look. -The antenna cover rounds off the carbon exterior portfolio perfectly. The aramid antenna cover is particularly durable and corrosion-resistant. Material: -Aramid" is the term BMW uses for the aramid fiber-reinforced plastic used for special accessory exterior components, similar to the term "carbon" for carbon fiber-reinforced plastic. Aramid is a high-quality fiber composite material that is very similar to carbon fiber in terms of its appearance and processing. In contrast to carbon, the components made from it have a high electromagnetic permeability. -Aramid has a lower density than carbon and is therefore slightly lighter than carbon. -Until now, aramid fibres have been used mainly in rallying (underbody protection) or sailing (carbon-aramid hybrid sails) or in ballistic protection for bulletproof vests or armored vehicles.

BMW

Item No.: 10017437

Manufacturer No.: 65205A59AD9

The antenna cover made of aramid fiber-reinforced plastic is a visual and functional highlight on the vehicle roof. Due to the extreme visual similarity between aramid fiber and carbon fiber, this product completes the "carbon" look of vehicles with a carbon package or other carbon exterior components. As aramid has a high permeability for electromagnetic waves, the functionality of the antenna is maintained. Carbon, on the other hand, has a shielding effect and cannot be used for antenna cladding. -The innovative material enables full functionality with a sporty, carbon-like look. -The antenna cover rounds off the carbon exterior portfolio perfectly. The aramid antenna cover is particularly durable and corrosion-resistant. Material: -Aramid" is the term BMW uses for the aramid fiber-reinforced plastic used for special accessory exterior components, similar to the term "carbon" for carbon fiber-reinforced plastic. Aramid is a high-quality fiber composite material that is very similar to carbon fiber in terms of its appearance and processing. In contrast to carbon, the components made from it have a high electromagnetic permeability. -Aramid has a lower density than carbon and is therefore slightly lighter than carbon. -Until now, aramid fibers have been used mainly in rallying (underbody protection) or sailing (carbon-aramid hybrid sails) or in ballistic protection for bulletproof vests or armored vehicles.

BMW

Item No.: 10016480

Manufacturer No.: 65205A59AB5

The M Performance antenna cover is made of high-quality aramid and underlines the sporty appearance of the vehicle. For vehicles without carbon roof. -Attractive, sporty look. -Optimal adjustment to the vehicle. -Easy installation. -The M Performance aerodynamic and exterior components are technically perfectly matched. -The striking parts are a clear differentiation from the standard vehicle. The elaborate production of the components gives them a high-quality appearance.

BMW

Item No.: 10009106

Manufacturer No.: 51145A14379

The Motorsport wrapping in the typical M colors makes a clear reference to motor racing and thus underlines the sporty character of the vehicle. In addition, the striking color accentuation conveys a feeling of exclusivity and individuality. -give the M4 Coupé an individual character -emphasize the sporty design of the M4 Coupé -optimally and precisely matched to the vehicle geometry -safe and easy application of the film without having to cut the vehicle or damage the paintwork -gives the M4 Coupé racing flair The M Performance Motorsport film is also suitable for the M4 Coupé with M Performance front flap carbon and M Performance side panel carbon.

BMW

Item No.: 10009105

Manufacturer No.: 51145A14374

Even the most powerful appearance can be enhanced: The exclusive M Performance motorsport wrapping in M colors further emphasizes the sporty character of the vehicle and makes a clear reference to motor racing. The high-quality film set is of course resistant to light, weathering and washing and is optimally matched to the vehicle geometry. For an even more individual appearance. The advantages of M Performance motorsport wrapping at a glance: -individual reinforcement of the sporty vehicle look -Optimally matched to the vehicle geometry -safe and easy application of the film -high durability and color fastness

BMW

Item No.: 10007229

Manufacturer No.: 16112472988

The carbon fuel filler cap is a cover cap for the existing fuel filler cap, which creates visual added value thanks to its production from genuine carbon and the exclusive M Performance branding. The fuel filler cap fits all vehicles built from 2010 onwards. -Clear visual enhancement of the existing fuel filler cap -modern, high-quality look -Performance lettering on brushed aluminum -extremely high quality -optimal fitting accuracy -best resistance to petrol and diesel fuels -easy installation -Tried and tested according to strict BMW standards -no restriction of the function of the existing fuel filler cap -can be transferred to the new vehicle when changing vehicles Functionality: Adhesive pads are attached to the inside of the carbon fuel filler cap to secure it to the existing fuel filler cap. No workshop visit is necessary for simple installation (sticking on).

BMW

Item No.: 10009102

Manufacturer No.: 51195A1B170

The M Performance rear winglets are made of high-quality carbon and emphasize the sporty appearance of the vehicle. Matching the optional carbon package (SA71C), the M Performance rear winglets perfectly emphasize the sporty appearance of the vehicle. All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon package. -attractive, sporty look -perfectly round off the all-round carbon look -Optimally matched to the vehicle and the optional carbon package (SA71C) -easy installation -The carbon parts are manufactured by hand in an elaborate process -can also be installed without SA71C

BMW

Item No.: 10009101

Manufacturer No.: 51195A1B169

The M Performance rear winglets are made of high-quality carbon and emphasize the sporty appearance of the vehicle. Matching the optional carbon package (SA71C), the M Performance rear winglets perfectly emphasize the sporty appearance of the vehicle. All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon package. -attractive, sporty look -perfectly round off the all-round carbon look -Optimally matched to the vehicle and the optional carbon package (SA71C) -easy installation -The carbon parts are manufactured by hand in an elaborate process -can also be installed without SA71C

BMW

Item No.: 10009103

Manufacturer No.: 51195A1B175

The M Performance rear winglets are made of high-quality carbon and emphasize the sporty appearance of the vehicle. Matching the optional carbon package (SA71C), the M Performance rear winglets perfectly emphasize the sporty appearance of the vehicle. All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon package. -attractive, sporty look -perfectly round off the all-round carbon look -Optimally matched to the vehicle and the optional carbon package (SA71C) -easy installation -The carbon parts are manufactured by hand in an elaborate process -can also be installed without SA71C

BMW

Item No.: 10009104

Manufacturer No.: 51195A1B176

The M Performance rear winglets are made of high-quality carbon and emphasize the sporty appearance of the vehicle. Matching the optional carbon package (SA71C), the M Performance rear winglets perfectly emphasize the sporty appearance of the vehicle. All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon package. -attractive, sporty look -perfectly round off the all-round carbon look -Optimally matched to the vehicle and the optional carbon package (SA71C) -easy installation -The carbon parts are manufactured by hand in an elaborate process -can also be installed without SA71C

BMW

Item No.: 10010307

Manufacturer No.: 51195A198B5

Matching the optional carbon package, the M Performance exterior components emphasize the sporty appearance of the BMW M3 or M4. All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon package. -attractive, sporty look -optimal aerodynamics -Enhances the sporty handling -perfectly rounds off the all-round carbon look -optimally matched to the vehicle and the optional carbon package -easy assembly -Manufactured in elaborate manual work Notes on installation: In order to install the carbon rear diffuser, it is essential to install the M Performance silencer system and the titanium tailpipe trim module.

BMW

Item No.: 10017802

Manufacturer No.: 51128075031

Give your BMW even more sportiness! The M Performance trim for the rear bumper gives your vehicle that certain something and rounds off the sporty appearance perfectly. -attractive, sporty look -Optimum tuning to the vehicle Only for vehicles with M Exterior Package Carbon.

BMW

Item No.: 10009092

Manufacturer No.: 51125A198B8

Original BMW M Performance replacement cover for the rear towing eye. The carbon surrounds are manufactured by hand. The cutting and draping of the fabric layers, the curing process of the plastic matrix and the milling of the raw parts takes several hours. The subsequent painting process poses a particular challenge. In order to enhance the unmistakable depth effect of the carbon fabric, the components are painted several times. Each individual coat of paint must be dried and then sanded. After the last coat of paint has been applied, the carbon part is polished to a high gloss (except for the open-pored carbon versions). The carbon components are qualified in accordance with the applicable BMW standard. This is the only way to ensure that the high requirements, e.g. with regard to ageing and temperature resistance, are met without cracking or paint peeling off the substrate and that yellowing of the matrix is avoided. This high degree of manual work and qualification effort is responsible for the price.

BMW

Item No.: 10299496

Manufacturer No.: 51628086380

CFK

BMW

Item No.: 10299500

Manufacturer No.: 51628086384

CFK

BMW

Item No.: 10005938

Manufacturer No.: 51192475051

The M Performance rear spoiler (flow-through) is made of high-quality carbon and emphasizes the sporty appearance of the vehicle. Matching the optional carbon package (SA71C), the M Performance rear spoiler perfectly emphasizes the sporty appearance of the vehicle. All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon package (SA71C). -Turns the vehicle into an extroverted racing car -Optimally matched to the vehicle and the optional carbon package (SA71C) -easy installation -The carbon parts are manufactured by hand in an elaborate process -Material details: All carbon components are made of carbon fiber reinforced plastic (CFRP). The components are sealed with clear lacquer.

BMW

Item No.: 10005934

Manufacturer No.: 51622473006

The roof edge spoiler in high-gloss black for the 3 Series Touring and M3 Touring enhances the rear section with its high-quality, sporty look. By changing the aerodynamic characteristics, it conveys a sporty driving feel. The roof edge spoiler is precisely matched to the vehicle design of the 3 Series Touring in terms of both style and function. Only for vehicles with M aerodynamics package.

BMW

Item No.: 10015684

Manufacturer No.: 51195A56BD5

The M Performance rear fins skillfully set the scene at the rear. -The M Performance aerodynamic and exterior components are technically perfectly matched. The elaborate production of the components gives them a high-quality appearance. -The M Performance components have been intensively tested in various tests. All legal requirements are met. -Only original BMW accessories protect against loss of warranty in the event of damage. -In addition to the adhesive, the adhesive primer VP 206 is also required. This is also not included in the scope of delivery.

BMW

Item No.: 10010411

Manufacturer No.: 83190417324

The Original BMW Cleaner R2 500ml is a cleaning and assembly aid containing isopropanol (70%) and can be used for the assembly of pedal pads, for example.

BMW

Item No.: 10718560

Manufacturer No.: 72155A57B31

The M Performance exterior components emphasize the sporty appearance, the parts fit perfectly into the geometry and appearance of the vehicle. -The M Performance towing strap brings the racing character to the road -attractive, sporty look -optimal adjustment to the vehicle -easy installation