Brake pad, sport pad

BMW

Item No.: 10009996

Manufacturer No.: 34108092822

The TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be taken into account: Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10008725

Manufacturer No.: 34212365766

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be noted: -Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the altered friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10008689

Manufacturer No.: 34112283764

The S4007 brake pad is derived from a proven long-track racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). -Shorter braking distance. -Better brake response. -Higher thermal load capacity. The following significantly different properties compared to the standard brake pad must be taken into account: - Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. - The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration. - Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. The vehicle must be run in carefully for the first 200 km after installation of the sports brake! After this, the sports brake will be fully effective.

BMW

Item No.: 10009994

Manufacturer No.: 34112284465

The S4007 brake pad is derived from a proven long-distance racing pad used in motorsport. It was specially developed with increased thermal performance in mind and meets the requirements of ECE-R 13H (legal requirement in many countries). -Shorter braking distance. -Better brake response. -Higher thermal load capacity. -Reduced comfort: The brake pad can cause significantly more noise. However, the function is not restricted by this. The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the changed friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out.

BMW

Item No.: 10017499

Manufacturer No.: 34109502514

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be noted: Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake disks (the brake disks of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10009991

Manufacturer No.: 34112284765

The S4007 brake pad is derived from a proven long-distance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be observed: The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -Shorter braking distance. -Better brake response. -Higher thermal load capacity.

BMW

Item No.: 10009993

Manufacturer No.: 34208092823

The TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be taken into account: Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10030223

Manufacturer No.: 34208873520

TX4007

BMW

Item No.: 10017453

Manufacturer No.: 34112365765

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven long-distance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be noted: -Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the altered friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. Safety instructions: Installation only in conjunction with new brake discs (the brake discs of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10009989

Manufacturer No.: 34219501835

The S4007 brake pad is derived from a proven long-distance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). -Shorter braking distance. -Better brake response. -Higher thermal load capacity. The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. -Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is installed. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out.

BMW

Item No.: 10009995

Manufacturer No.: 34112283365

The S4007 brake pad is derived from a proven long-track racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be noted: Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -Shorter braking distance. -Better brake response. -Higher thermal load capacity.

BMW

Item No.: 10158546

Manufacturer No.: 34108094045

TX4007

BMW

Item No.: 10009990

Manufacturer No.: 34212284766

The S4007 brake pad is derived from a proven long-distance racing pad used in motorsport. It was specially developed with increased thermal performance in mind and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be observed: The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake disks: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -Shorter braking distance. -Better brake response. -Higher thermal load capacity.

BMW

Item No.: 10017415

Manufacturer No.: 34212284466

The S4007 or TX4007 brake pad (new product designation from F90 vehicles) is derived from a proven endurance racing pad used in motorsport. It has been specially developed for increased thermal performance and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be observed: The design of the brake force distribution is racing-oriented. This supports dynamic steering on the brakes and differs significantly from the standard configuration. Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -shorter braking distance -better brake response -higher thermal load capacity Safety instructions: Installation only in conjunction with new brake disks (the brake disks of M vehicles are all perforated)! Due to its special properties, the pad reacts even more sensitively to external influences such as rim cleaner, road salt and parking the vehicle with a wet brake disk. Therefore, operation in winter is not recommended. Direct spraying of the brake pad and disc with rim cleaner should also be avoided.

BMW

Item No.: 10008721

Manufacturer No.: 34212283366

The S4007 brake pad is derived from a proven long-distance racing pad used in motorsport. It was specially developed with increased thermal performance in mind and meets the requirements of ECE-R 13H (legal requirement in many countries). The following significantly different properties compared to the standard brake pad must be noted: - Reduced comfort: The brake pad can cause significantly more noise. However, this does not restrict its function. - The brake force distribution is designed with racing in mind. This supports dynamic steering on the brakes and differs significantly from the standard configuration. - Increased stress on the brake discs: Due to the modified friction mechanisms, the brake disk wears faster. It is therefore recommended that the brake disc is also replaced when this brake pad is fitted. It is essential to replace the brake disk if there are cracks of 13 mm or more, even before the brake pad wears out. -shorter braking distance -better brake response -Higher thermal load capacity