BMW M Performance

BMW

Item No.: 10008767

Manufacturer No.: 18302349213

The chrome tailpipe trim with an 8-cylinder look enhances the vehicle's appearance even further - it looks more striking, dynamic and uncompromising. The tailpipe trim is made from high-quality stainless steel, has a high-gloss chrome finish and is highly corrosion-resistant and durable. -The trim is "designed by BMW" and offers the vehicle a sophisticated upgrade: it gives the vehicle a particularly striking look that suggests an 8-cylinder engine. -The tailpipe trim in 8-cylinder look makes the X5 more imposing and extravagant. -The design of the trim corresponds to the X5 8-cylinder vehicles. With this trim, the rear of the vehicle can hardly be distinguished from an 8-cylinder series. -The tailpipe trim is manufactured to the highest quality. It is made of chrome-plated stainless steel and has a very long service life. -Easy installation: The chrome tailpipe trim is firmly connected to the inner funnel and the funnels are already welded to the connecting pipe. They only need to be attached to the existing silencers using a clamp. -Tested quality: All legal requirements are met and no additional approvals or entries in the vehicle documents are required. Design, material and safety meet the usual high BMW standards. Technical information: -The silencer must be trimmed before fitting. -The lower part of the rear apron must be replaced. -The exhaust flap is not required on petrol vehicles due to the tailpipe cover. This can lead to a slightly increased noise level when starting off and when driving at low engine speeds.

BMW

Item No.: 10008771

Manufacturer No.: 18302349683

The chrome tailpipe trim with an 8-cylinder look enhances the vehicle's appearance even further - it looks more striking, dynamic and uncompromising. The tailpipe trim is made from high-quality stainless steel, has a high-gloss chrome finish and is highly corrosion-resistant and durable. -The trim is "designed by BMW" and offers the vehicle a sophisticated upgrade: it gives the vehicle a particularly striking look that suggests an 8-cylinder engine. -The tailpipe trim in 8-cylinder look makes the X5 more imposing and extravagant. -The design of the trim corresponds to the X5 8-cylinder vehicles. With this trim, the rear of the vehicle can hardly be distinguished from an 8-cylinder series. -The tailpipe trim is manufactured to the highest quality. It is made of chrome-plated stainless steel and has a very long service life. -Easy installation: The chrome tailpipe trim is firmly connected to the inner funnel and the funnels are already welded to the connecting pipe. They only need to be attached to the existing silencers using a clamp. -Tested quality: All legal requirements are met and no additional approvals or entries in the vehicle documents are required. Design, material and safety meet the usual high BMW standards. Technical information: -The silencer must be trimmed before fitting. -The lower part of the rear apron must be replaced. -The exhaust flap is not required on petrol vehicles due to the tailpipe cover. This can lead to a slightly increased noise level when starting off and when driving at low engine speeds.

BMW

Item No.: 10003053

Manufacturer No.: 18302349214

Original BMW M Performance tailpipe trim chrome incl. rear lower bumper trim. Suitable for the X5 with 25d and 25dX engines. Only suitable for vehicles with the following features: -without M sports package -without Pure Excellence exterior design -without Pure Experience exterior design -without M aerodynamics package

BMW

Item No.: 10003054

Manufacturer No.: 18302349216

Original BMW M Performance tailpipe trim chrome incl. trim bumper rear below. Suitable for the X5 with the engine 25d and 25dX. Only suitable for vehicles with the following features: -with exterior design Pure Excellence or -with exterior design Pure Experience

BMW

Item No.: 10008768

Manufacturer No.: 18302349668

The chrome tailpipe trim with an 8-cylinder look enhances the vehicle's appearance even further - it looks more striking, dynamic and uncompromising. The tailpipe trim is made from high-quality stainless steel, has a high-gloss chrome finish and is highly corrosion-resistant and durable. -The trim is "designed by BMW" and provides the vehicle with a sophisticated upgrade: it gives a particularly striking look that suggests an 8-cylinder engine. -The tailpipe trim in 8-cylinder look makes the X5 more imposing and extravagant. -The design of the trim corresponds to the X5 8-cylinder vehicles. With this trim, the rear of the vehicle can hardly be distinguished from an 8-cylinder series. -The tailpipe trim is manufactured to the highest quality. It is made of chrome-plated stainless steel and has a very long service life. -Simple installation: The chrome tailpipe trim is firmly connected to the inner funnel and the funnels are already welded to the connecting pipe. They only need to be attached to the existing silencers using a clamp. -Tested quality: All legal requirements are met and no additional approvals or entries in the vehicle documents are required. Design, material and safety meet the usual high BMW standards. Technical information: -The silencer must be trimmed before fitting. -The lower part of the rear apron must be replaced. -The exhaust flap is not required on petrol vehicles due to the tailpipe cover. This can lead to a slightly increased noise level when starting off and when driving at low engine speeds.

BMW

Item No.: 10008769

Manufacturer No.: 18302349212

The chrome tailpipe trim with an 8-cylinder look enhances the vehicle's appearance even further - it looks more striking, dynamic and uncompromising. The tailpipe trim is made from high-quality stainless steel, has a high-gloss chrome finish and is highly corrosion-resistant and durable. -The trim is "designed by BMW" and offers the vehicle a sophisticated upgrade: it gives the vehicle a particularly striking look that suggests an 8-cylinder engine. -The tailpipe trim in 8-cylinder look makes the X5 more imposing and extravagant. -The design of the trim corresponds to the X5 8-cylinder vehicles. With this trim, the rear of the vehicle can hardly be distinguished from an 8-cylinder series. -The tailpipe trim is manufactured to the highest quality. It is made of chrome-plated stainless steel and has a very long service life. -Easy installation: The chrome tailpipe trim is firmly connected to the inner funnel and the funnels are already welded to the connecting pipe. They only need to be attached to the existing silencers using a clamp. -Tested quality: All legal requirements are met and no additional approvals or entries in the vehicle documents are required. Design, material and safety meet the usual high BMW standards. Technical information: -The silencer must be trimmed before fitting. -The lower part of the rear apron must be replaced. -The exhaust flap is not required on petrol vehicles due to the tailpipe cover. This can lead to a slightly increased noise level when starting off and when driving at low engine speeds.

BMW

Item No.: 10005634

Manufacturer No.: 18302344205

Stainless steel silencer system with improved exhaust routing. The acoustics have been optimized in terms of sound quality and volume to further enhance the typical BMW straight six-cylinder character. The system provides an outstanding, sporty sound in the exterior and interior and was developed using the latest CAD and FEM technology for optimum fitting accuracy and OEM quality.

BMW

Item No.: 10009025

Manufacturer No.: 18302349679

With this cover, a tailpipe cover with an 8-cylinder look is available for 6-cylinder vehicles. The high-gloss chrome-plated stainless steel trim is already welded onto the connecting pipe and can be attached to the existing exhaust system using a clamp. This must be trimmed beforehand. Your advantages: -Striking appearance of the rear of the vehicle. -No welding of the cover necessary. All parts made of high-quality stainless steel to ensure a long service life and corrosion resistance. Chrome-plated surface. Scope of delivery: -Welded tailpipe cover on connecting pipe - Clamp

BMW

Item No.: 10119738

Manufacturer No.: 18302455297

D=75,6mm

BMW

Item No.: 10120665

Manufacturer No.: 18307791587

D=70,6mm

BMW / MINI

Item No.: 10007183

Manufacturer No.: 18307560781

The component clamping sleeve/pipe connector (ø 75 mm) offers the possibility of repairing a repair section on the exhaust system quickly and cost-effectively. Elaborate welding work and time-consuming fitting are no longer necessary. -Low installation costs: no additional work (e.g. welding) or special tools are required. -The clamping sleeves are made of stainless steel and are therefore absolutely corrosion and heat resistant. Simple installation: time-saving but still high-strength, highly resilient and absolutely gas-tight thanks to special technology. Double-walled with screw connection.

BMW

Item No.: 10003037

Manufacturer No.: 18302349672

Original BMW M Performance set of chrome tailpipe trims (left and right) in 8-cylinder look. Suitable for the X5 with the 25d engine with and without xDrive (B47 and N47S1). The M Performance tailpipe trims now fit in conjunction with the aerodynamic rear.

BMW

Item No.: 10003035

Manufacturer No.: 18302287154

Original BMW M Performance set of tailpipe trims chrome (left and right) in 8 cylinder look. Suitable for the X5 with the engine 35i xDrive (N55). The M Performance tailpipe trims now fit in conjunction with the aerodynamic rear.

BMW

Item No.: 10003036

Manufacturer No.: 18302287155

Original BMW M Performance set of chrome tailpipe trims (left and right) in 8-cylinder look. Suitable for the X5 with the 30d xDrive (N57) engine. The M Performance tailpipe trims now fit in conjunction with the aerodynamic rear.