JCW Tuning Kit

MINI

Item No.: 10007483

Manufacturer No.: 11122208027

The new John Cooper Works (JCW) Tuning Kit propels the MINI Cooper S to completely new heights of performance: With the kit, the twin-scroll turbo engine produces 200 hp (147 kW). At the same time, the maximum torque is 250 Nm between 1,750 and 5,500 rpm. And with the overboost function, even 270 Nm is achieved for a short time in the range from 1,800 - 5,000 rpm. This allows the MINI Cooper S to accelerate from 0 to 100 km/h in just 6.8 sec. and reach a top speed of 234 km/h. The main components are the sports silencer with optimized exhaust pipe routing, which emphasizes the impressive, sporty sound even more and is also visually impressive with the powerful tailpipe trims in chrome. The optimized exhaust manifold also ensures maximum temperature resistance for maximum driving performance. In addition, the specially developed air filter and optimized air routing also contribute to improved power delivery and acoustic performance. The kit is rounded off by the adapted engine electronics. This ensures an even more responsive engine that accelerates even faster across the entire rev range. In the design and development of the John Cooper Works Tuning Kit, the focus was on the philosophy of high-quality tuning that meets the high requirements of the BMW Group. This applies in particular with regard to durability, stress on other vehicle components and compliance with statutory regulations. Because in addition to improved performance, "tuning" is not only about quality but also about your own safety. The installation of the John Cooper Works Tuning Kit is only possible in its entirety for approval and warranty reasons. Individual parts may not be installed! The program statuses are protected and can only be used with a vehicle-specific unlock code, which is supplied with the tuning kit on CD. Therefore, the chassis number must be specified when ordering the tuning kit. improved driving performance sporty, typical JCW sound optical differentiation to the series through sports silencer with two 90mm tailpipe trims and JCW logo optimized exhaust manifold for high temperature stress at maximum driving performance optimized air filter and intake air duct with John Cooper Works badges Warranty remains unchanged

MINI

Item No.: 10087649

Manufacturer No.: 11627593149

MINI

Item No.: 10120231

Manufacturer No.: 18307589503

MINI

Item No.: 10088126

Manufacturer No.: 11657557013

MINI

Item No.: 10088129

Manufacturer No.: 11657559557

M8

MINI

Item No.: 10120213

Manufacturer No.: 18307583746

M8

MINI

Item No.: 10117513

Manufacturer No.: 18102152462

JCW

MINI

Item No.: 10009033

Manufacturer No.: 18302151408

The tailpipe trim made of polished, chrome-plated stainless steel creates an impressive, sporty look.

MINI

Item No.: 10071463

Manufacturer No.: 11122218978

R5x JCW LCI

BMW

Item No.: 10040191

Manufacturer No.: 01290441509

Tuningkit JCW

MINI

Item No.: 10202832

Manufacturer No.: 51117232803

J. Cooper Works

MINI

Item No.: 10219023

Manufacturer No.: 51147476376

Original JCW badge for the tailgate.

MINI

Item No.: 10104602

Manufacturer No.: 13717577548

60x9

MINI

Item No.: 10104517

Manufacturer No.: 13717565965

MINI

Item No.: 10074999

Manufacturer No.: 11157607779

MINI

Item No.: 10104786

Manufacturer No.: 13717627501

MINI

Item No.: 10075006

Manufacturer No.: 11157618255

BMW / MINI

Item No.: 10007398

Manufacturer No.: 18307560778

The component clamping sleeve/pipe connector (ø 55 mm) offers the possibility of repairing a repair section on the exhaust system quickly and cost-effectively. Elaborate welding work and time-consuming fitting are no longer necessary. -Low installation costs: no additional work (e.g. welding) or special tools are required. -The clamping sleeves are made of stainless steel and are therefore absolutely corrosion and heat resistant. Simple installation: time-saving but still high-strength, highly resilient and absolutely gas-tight thanks to special technology. Double-walled with screw connection.